Kesmak KSY 1300-1600 Band Saw

Kesmak KSY 1300-1600

Semi-automatic twin column horizontal bandsaw for general production cutting of all types of steel and non-ferrous metals.

Technical Specifications	KSY 1300×1600
Capacity 90° – Round	Ø 1300 mm
Capacity 90° – Square	1300×1300 mm
Capacity 90° – Rectangle	1300×1600 mm
Blade Drive	11 kW
Hydraulic Pump	2,2 kW
Coolant Pump	0,55 kW
Swarf Conveyor	0, 18 kW
Blade Size	12950 x 80 x 1,6 mm
Feeding Height	600 mm
Vice Maximum Opening	1600 mm
Vice Minimum Closing	600 mm
Vice Height	800 mm
Height – Width – Length	3400 x 1800 x 6500
Weight	11600 kg

Laser Line

Either a quality Addison fit German battery unit or factory fit powered item.

Addimist Lubrication System

Pure oil micro-mist blade lubrication system recommended for cutting tubes and sectional material where flood lubricant loss through the material is a problem. This precision delivery system allows adjustment for the number of pulses per min, and the quantity of each dose. (requires compressed air supply) The standard flood system is retained for cutting solid material and the operator can simply switch between systems.

Upper Clamp System

Vertical hydraulic vice used for cutting bundles and rafts of material

Swarf Brush

Fully adjustable swarf brush, essential for maximising blade life and improving cut finish.

Hydraulic Blade Guide

Solid carbide precision blade guides that are automatically tensioned hydraulically and relaxed when not in use.

Hydraulic Vice

Full stroke hydraulic vice

Hydraulic Blade Tension

Exact blade tension is applied using a hydraulic system

Curve Cutting Sensor

A device for measuring the vertical tolerance, if the user defined parameter is exceeded the machine with end the cutting cycle

Synchronised Guide Arm

A very useful device that automatically synchronised the moving guide arm with the vice position. This guarantees optimum blade support at all times preserving blade life and optimising cutting performance.

Swarf Conveyor

Helical type powered swarf removal system.

Roller table

Integral roller table on infeed and outfeed locations

Cutting Control

Control panel with inverter setting of the blade speed and precise control of the hydraulic down feed.

Cutting Stroke

Adjustable upper and lower limits for blade stroke to reduce cutting cycle times. Easily accessed from the front of the machine.

Roller System

Standard and custom length modules of free roller, or powered roller tables with chain and reduction gearbox transmission.

KSY 1300x1600 Data Sheet

Categories